Author: Danny Shepherd <danny@mcwalterscafe.co.uk>
Date: Sat, 20 Dec 2003 10:39:11
Hi all, Firstly can I say how useful and informative I have found this forum to be, I have gleamed a lot reading all your messages,(creep mode off). Now I hope you guys don't mind a stupid question,
Author: Danny Shepherd <danny@mcwalterscafe.co.uk>
Date: Mon, 22 Dec 2003 10:20:58
Thanks Alex, I'll try to do it in one piece, if that fails I'll do it in sections. either that or I get the wife to do it, she's better at wall papering than me :-) Cheers Danny Danny, If you want to
Author: Danny Shepherd <danny@mcwalterscafe.co.uk>
Date: Wed, 24 Dec 2003 09:44:08
Tis done, Spent all day yesterday in the hangar, covered all the baggage area, including front and aft with 2 ply bid. Cheers Danny Don't neglect to do both front and aft sides of the bulkhead. Two l
Author: Danny Shepherd <danny@mcwalterscafe.co.uk>
Date: Fri, 23 Apr 2004 19:41:32
Hi All, just like to say thanks for the warm welcome I received at the EGCK flyin today, nice to put faces to names. special thanks to David Joyce for reminding me of what my "little spitfire" will b
Author: Danny Shepherd <danny@mcwalterscafe.co.uk>
Date: Fri, 9 Jul 2004 21:22:34
Hi All, Just started fitting the doors, everything seems strait forward until on page 35-2 it shows a plywood insert on the fuselage side of the hinge. like an plonker I presumed these were already f
Peter, I took my panel to Matthew, Russell Great Edstone, Kirkbymoorside. He did a great job and reasonably priced. choice of 26 colours. stuff to use? The panel on our classic needs some re-work so
Hi Mattias, I don't know of any Europa with wing tanks, don't think they would take weight and strain. you can of course fit the temporary tank in the baggage bay. btw my computer crashed a few month
Mike, I had the panel plus the instrument cut out panel ( IM01T ) and the engine instrument panel ( IMO3TV ) sprayed in a dark grey anthracite. Cost 70. Looks pretty cool at the moment, but time will
2.00 DATE_IN_FUTURE_24_48 Date: is 24 to 48 hours after Received: date Hi All, Can any one tell me what heat reflective material they used in their engine bay? I've had a look at the Spruce catalogue
Hi Steve, Simple, now your talking my kind of language. :-) I purchased a cheep hand held scales from Foxons, the local fisherman's store. I taped some string to the rear of the tyre attached the sca
2.00 DATE_IN_FUTURE_24_48 Date: is 24 to 48 hours after Received: date Hi All, I am just about to put in the brake pipes on my tri gear xs, Can any of you who have completed this job tell me how you
Hi All, Firstly Happy New Year to all Europhhiles. "Er indoors" has persuaded me it's time to visit Australia again, (actually it didn't take a lot of persuading :-) ) . It would be nice if we could
Hi All, Does any one know of a supplier of zolatone in the uk. I would order it from Spruce, but being "hazardous" it would probably cost an arm and a leg :-( Cheers Danny G-c.e.r.i tri gear 50% comp
Hi Steve, I have converted my tri gear to finger brakes and have all the parts for the foot brakes stored in my hangar (actually its a big shed, but I call it my hangar :-) .) your welcome to any of
Hi All, While we're talking about fuel gauges etc, (I've fitted th factory fuel gauge) has any one fitted the fuel monitoring system FS450 as advertised by Harry Mendelssohn. It looks neat and reason
Hi All, I have fitted led nav lights in the wing tips, courtesy of Fred Klein and Creativair, but where have other builders placed the rear light. I know Cliff Shaw has attached his to the rudder, bu
Hi all, seeing that the forum is quiet at the moment, I have another silly question for the guys who have fitted the rear nav light to the rudder. How did you route the wire though the rudder? Thanks