Bud, I measured my cap at the hangar yesterday and it looks like a 65mm dia cap s o take me off your list for the 70mm cap. Regards Dave Park G-LDVO Sent from my iPad try to come by after we get back
Have had iced up pitot on a Seneca coming out of Doncaster. You are then on Power/Performance!! Dave Sent from my iPhone requirements are more about prop and airframe de-icing ability than pitot heat
Yes, good luck. Dave Sent from my iPad hat no work from the [in] famous photographer who used to run [ into the gro und] Europa, be used in the LAA Magazine,[ initials of this git are KW, I do n't wa
I used the bendable probes in to each side from the top inboard of the headrests. Never been reliable? Dave Sent from my iPad Pocket locker location and requires new hole cutting in the tank. is in t
On my Acrosport 11 before Europa bug! I used a pencil split along length. And glued under trailing edge of the appropriate aileron. Then 'hands-off' !!! Sent from my iPhone tension onto a bungee to a
Congratulations from Dave Park G-LDVO Sent from my iPad ver@matronics.com] On Behalf Of markandrhonda@harveyfarm.net.au rop the left wing with hands off which I will have to work on but other than th
Ron, I adapted the Europa kit by cutting off the bottom part of the reservoir that screws in to the master cylinder and attaching a plastic tube to it long enough to reach a jam jar on the seat area,
Just seen the other posts, so will bin it. It is true you have to keep it clear of gumming up. The more you use it the better and check the dispensing with samples. Dave Sent from my iPad
Hi Richard, Looking back at emails I thing it was around $47 and I found a PayPal item for 37. It is still in packaging, how does 25 sound. I wasn't I sure at the time I ordered it as ac 60 miles awa
I have had a Odyssey Extreme 15 PC370 fitted for past two years and am looking to fit a new battery for the new season of hopefully longer European flights this summer. The alternative Odyssey would
When i did mine we had applicators and one mixer. Any joint line was later v anished with filler. Thanks to Nev Eyre. Dave L-LDVO Sent from my iPhone mes. 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Midnight here will look tomorrow I have converted to trike but may still have the fairing. Regards Dave Sent from my iPad in conjunction w/ the Singleton Tail Wheel Mod, Id be most obliged to have a
Fred here are pis of my old one Sent from my iPad t may still have the fairing. talled in conjunction w/ the Singleton Tail Wheel Mod, I=99d be most o bliged to have a look at themshowing in particul
Richard, I use my Mini Ipad fitted to right hand inst panel powered by cigarette lighter socket direct from battery thru fuse on engine side of firewall. The lighter socket also serves as a convenien
Thanks Bob, Waiting to see if Mod required. Dave Sent from my iPad footwell area. You can see what I did on my EuropaOwners.org build website. effort. I believe that the final configuration is slight
Rick, I use the following fuel computer. Very accurate once you calibrate it. I use two senders for flow and return. Easy to set up in the system. Dave G-LDVO FC10 + 2 FT60s from support@fdatasystems