Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Fri, 23 Feb 2007 16:11:47
Yes - but make sure that the trailer is anchored, the fuse is strapped down and that the wings and the elevators are removed. The wing supports should be hinged down on the ground as otherwise the st
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Mon, 26 Nov 2007 09:37:43
I discovered by chance that the lower half of the ramp hinge on my monowheel trailer was badly fractured and that only one remaining lug was operational. Had that failed I dread to think of the conse
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Tue, 4 Dec 2007 09:32:55
Further to my recent e-mail regarding the condition of the lower flange of the hinge on my mono trailer I attach herewith a photograph of the flange. Owing to the proximity of the hinge to the ground
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Wed, 9 Jan 2008 09:19:41
Richard, I tried sending you this message at richardholder@avnet.co.uk but it was bounced, so I'm sending it via the forum. I am using a Lynx Micro System in my Europa and also my flexwing in conjunc
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Mon, 28 Apr 2008 10:04:32
David, I would like to attend on the 4th May if it is not too late to join in. Roger Anderson - G-BXTD -- Original Message -- From: David.Corbett To: Europa Forum Sent: Thursday, April 24, 2008 6:39
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Thu, 26 Jun 2008 09:48:54
Fergus, Further to the other replies that you have had which suggest lining the supporting medium with carpet, the trouble with carpet is that it absorbs water if you have to trail in the rain. I now
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Wed, 29 Oct 2008 09:53:34
Paul, I think that the problem may be that the tacho coil is picking up secondary impulses as the speed increases - which accounts for the doubling of the reading. The Rotax manual does show a graph
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Wed, 3 Dec 2008 09:35:48
David, The Arplast spinner blends in with the cowl and looks very nice on my Europa. Roger G-BXTD -- Original Message -- From: David Steade To: europa-list@matronics.com Sent: Tuesday, December 02, 2
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Tue, 19 May 2009 09:20:43
Paul, Rotax produce a guide to tacho problems which is available on line. One of the solutions suggested is to solder a 100 or 200 ohm resistor across the trigger coil terminals. Fitting a 100 ohm re
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Mon, 24 Aug 2009 10:18:49
The snake scope advertised by Maplin was mentioned on this forum recently. I bought one but when I came to load the software I was greeted by a warning that the software had not been passed as being
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Mon, 14 Sep 2009 12:32:33
I have a Benwick fuel flow computer fitted to a microlight and the transducer has ceased to operate satisfactorily. I understand that Benwick have gone out of business, but I believe that some member
Author: Roger Anderson <pr@dcanderson.myzen.co.uk>
Date: Thu, 1 Oct 2009 13:05:51
I made good some aileron hinges using the kit supplied by Gary Hall (at the above address) earlier this year. The sleeves were easy to fit. This has reduced the play and should now eliminate any fur