Delivery Failure Report
Your Door Switches
document:
was not "Carl Reynaud AT RAY_RMC_NAUTECH@EO"
delivered
because: User "Carl Reynaud AT RAY_RMC_NAUTECH@EO" not
listed in public Name & Address Book
EOLEX-MS01/EO/Raytheon/US, EOLEX-MS01/EO/Raytheon/US,
EOLEX-MS01/EO/Raytheon/US
________________________
cc:
From: europa@avnet.co.uk AT smtp@EO-ccMail
Date: 06/20/97 09:37:52 PM
Subject: Door Switches
Graham wrote:-
>
>There is an error in the description of the wiring of the four
door switches, >perpetuated in the copy in Europa Flyer. The
rear switches must wired in >parallel, before they are placed
in series with the forward activating serial >switches.
Otherwise both bolts would have to be out for activiation,
rather
>than either !
>
The above circuit does not indicate WHICH door is closed
incorrectly ---- a
better circuit is to
wire the front (NO) and rear (NC) switches of each door in
series and then wire
both door circuits
in parallel. This way you get a beep as each door is closed
and an incorrectly
closed
door will immediately cause the alarm to sound continuously.
Ted
_______
The Europa List is supported by Aviators Network UK -
info@avnet.co.uk
by gatekeeper.ray.com
Date: 20 Jun 97 21:37:52 EDT
From: Edward Gladstone <101327.626@compuserve.com>
Subject: Door Switches
|