Delivery Failure Report
Your Plywood (3mm) piece identification
document:
was not "Carl Reynaud AT RAY_RMC_NAUTECH@EO"
delivered
because: User "Carl Reynaud AT RAY_RMC_NAUTECH@EO" not
listed in public Name & Address Book
EOLEX-MS01/EO/Raytheon/US, EOLEX-MS01/EO/Raytheon/US,
EOLEX-MS01/EO/Raytheon/US
________________________
cc:
From: europa@avnet.co.uk AT smtp-ecn@eolex_ecn@EO-ccMail
Date: 06/23/97 06:45:11 PM
Subject: Plywood (3mm) piece identification
About to cut out the 70mm square plywood pieces for the spar
bush reinforcement, I suddenly realized I haven't the foggiest
idea which ply piece to cut them from!
I have 7 3mm plywood pieces left, labeled F06,2,3,4,6&7, with
no hint as to where each of them is destined. I don't wish to
cut up anything that I will need later. The fuselage manual's
Annex A-3 (Fig. 1. 3mm Plywood /Cutting Plan) is no help, as
there are no dimensions, and it seems to be obsolete as it
presupposes 2 760 mm squares supplied, and I have instead a
number of various sized rectangular pieces.
How about it, Andy? Am I missing something? Is there a key to
where these pieces are supposed to be used?
Pops
A-36
_______
The Europa List is supported by Aviators Network UK -
info@avnet.co.uk
by gatekeeper.ray.com
From: ChuckPops@aol.com
Date: Sun, 22 Jun 1997 20:25:39 -0400 (EDT)
Subject: Plywood (3mm) piece identification
|