Some of you will have read about John Scotts Mod 46 (PFA approved) in
the Europa club magazine.
I just fitted my bits today and as claimed, the actual work involved is
only an hour or two (plus time for the Redux to set). I understand the
record is 40 minutes.
John will supply the bits 20 or will provide details if you prefer. The
inserts are made of alloy and have four grooves to clear the rivets,
though if yours (rivets that is !)arent at 90 degrees you will need to
do some filing. Each insert is supplied with a small self tapping screw
attached to act as a handle which is removed after insertion. Note, the
ones in my picture are alodined - they dont come that way.
For details, contact John Scott, 68 Millend Rd, Cambridge, CB1 4JP.
Tel 0421 736293 (mobile phone no, but not always switched on)
BTW John also has details of an alternative tailwheel assembly (ie- an
improved version of the factory mod) also PFA approved.
Here is a picture of the Mod 46 components - hope you can all unscramble
it !
Attachment converted: R&W LC475:mod46.JPG (JPEG/JVWR) (0000CD5C)
|