Hi Kenneth,
maybe I was lucky but I think my links work just perfect.
I used plenty of flox and found no problem.
Last weekend I installed both wings to cockpit modul
and I am so happy: ailerons move smoothly when turning
stick left-right. Those bell cranks works also nicely;
with alignment of their pivot bolts I was really lucky.
Thank you for advice.
Cheers, Raimo #417
----- Original Message -----
From: Kenneth Whiteley <kenwhit@kenwhit.demon.co.uk>
Subject: Re: friction
> In message <00c101c1b286$ff4eca40$15133fd4@033753777>, RWM-SYSTEMS
> <raimo.toivio@rwm-systems.fi> writes
> >
> >How can I know it is good enough?
> >
> A good guide is that, with a control stick in position, it should self-
> centre when the stick is released (with the cockpit unit inverted). The
> use of flox can upset the alignment when you come to fit it. A number of
> people have used the flox to provide the load spreading area, but have
> not actually bonded the Tufnol to it. This gives the opportunity for a
> second (or ...tenth) opportunity to adjust the alignment.
>
> Ken Whiteley
|