Karim
"Can someone please measure the distance of a completed aileron from the
flange to the trailing edge and let me know what the measurements are."
...... Aileron root 185mm - which lines up well with the flap, tip is
175mm - making a 1cm difference.
(Should mention that my aileron tip is 5mm short of the trailing edge of
the wing tip - Neville recommends shortening the wing tip by whatever is
necessary after filling).
Regards
Roger Mills
-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Re: Flange to trailing edge measurements.
Hi Folks,
just completed my ailerons and measured the distance from
the
flange to the trailing edge on either side of each aileron. Found on the
port
aileron the difference was 1cm and on the starboard aileron the
difference
was 2cm. I suspect an error when the foam was being hot wired. Can
someone please measure the distance of a completed aileron from the
flange to the trailing edge and let me know what the measurements are.
Preferably if its already fitted to the wing( XS WINGS) .
regards Karim.
|