OK, thanks. I spoke to Andy Draper and he confirmed that I do have the old pins.
The old ones are 1/16" thick plates whereas the new ones are 1/10" thick. Good
thing I checked this before bonding them into place.
Steve Hagar <hagargs@earthlink.net> wrote:
Andrew:
The mounting plates for the good pins are about 0.125" thick. The bad ones
are about half that thick.
Steve Hagar
A143
Mesa, AZ
> [Original Message]
> From: Andrew Sarangan
> Date: 12/26/02 3:46:46 PM
> Subject: Mod 58
>
> Mod 58 calls for a replacement of the tab drive pin for kits delivered
before Dec 2000. I picked up my kit in Dec 2000, so I am not sure if I have
the old pins or the new pins. Does anyone know how I can tell the
difference? I could call the sales office, but they are closed until
January 6.
>
>
> ---------------------------------
> The Europa Forum is supported by Aviators Network UK
> In the event of problems contact
> The Europa Club website is at
--- Steve Hagar
--- hagargs@earthlink.net
The Europa Forum is supported by Aviators Network UK
In the event of problems contact
The Europa Club website is at
---------------------------------
|