ALL acid based plating incurs Hydrogen embrittlement and needs to be baked,
I've been told.
Cy Galley - Bellanca Champion Club
Newsletter Editor & EAA TC
www.bellanca-championclub.com
Actively supporting Aeroncas every day
Quarterly newsletters on time
Reasonable document reprints
1-518-731-6800
----- Original Message -----
From: "Alan Twigg" <alan.twigg@ntlworld.com>
Subject: Europa-List: Tailwheel
>
> My first entry so be gentle with me,
>
> I am about to get some soft CAD plating done on some steel parts. I
notice the tailwheel leg/spring has some light corrosion on it and it has
never left the workshop.
> My dilemma is do I plate it or not, will plating embrittle and affect
spring qualities, if indeed it is a spring?
>
> I also just got the main ( Mono) leg painted in a chip resistant white, it
made the engine/ gear mount and Rudder pedal paintwork look amateur,( the
rudder pedal paint came off with the masking tape factory wrapped around
it), so I decided to repaint. Cleaning it off with Nitromors it just ran
off, with residual wiped off with a cloth, no sign of surface prep or
priming.
> Anyone else repainted these items?
>
> Regards Alan Twigg
> Mono Motorglider G-GIWT
>
>
|