I cruise at 5000rpm @ 30"MP and get 130 knots or better.
ZK CHV
155hrs
Sue and Bill
----- Original Message -----
From: "Garry Stout" <garrys@tampabay.rr.com>
Subject: Re: Europa-List: Cruise power setting
>
> Hans-Peter,
> My typical cruise setting is 32" MP, and 4900-5000 RPM. The higher RPM
(eg:
> 5300) doesn't seem to improve my cruise speed much but does add to the
noise
> level.
>
> Garry Stout
>
> ----- Original Message -----
> From: "Jim Brown" <acrojim@cfl.rr.com>
> To: <europa-list@matronics.com>
> Subject: Re: Europa-List: Cruise power setting
>
>
> >
> > Hans-Peter
> >
> > I run my same setup in cruise at 5300 RPM and 33" MP
> >
> > Jim Brown
> > 500+ hrs. flying N398JB
> >
> >
> > Hans - Peter Reusser wrote:
> >
> <hpreusser@tiscalinet.ch>
> > >
> > > Hello
> > >
> > > I am doing some prelimenary planning of the elektrical system and am
> > > interested in the typical cruise power RPM setting for the Rotax 914
> engine
> > > with an airmaster CS prop.
> > > I need this to evaluate the power output of an alternator mounted to
the
> > > vacum pump drive of the engine.
> > >
> > > Thank you for your help.
> > >
> > > Hans-Peter #498 XS
> > > On closing the wings.
> > >
> > > *****************************************************************
> > >
> > > Hans-Peter und Christa Reusser Tel: +41 (33) 654 00 24
> > > Spiezbergstr. 13 Fax: +41 (33) 654 30 21
> > > 3700 Spiez E-mail: hpreusser@tiscalinet.ch
> > >
> > > *****************************************************************
> > >
> >
> >
>
>
|