We are taking advantage of extended down-time to swap out, and fire-sleeve, all
the forward fuel hose per 5 year recommendation. I need to check that we have
the correct hose size spec' as I cannot locate the latest published layout
on-line.
As we found it, 8mm ID hose runs to the mechanical pump then back to the FloScan
and downstream of it to the first (s/b) Carb Tee. Beyond that, 6mm hose. We
have build and update paperwork to show this spec. However, offering up 8mm hose
to the pump outlet fitting it is a worryingly loose fit until the clamp is
tightened.
Are we happy with this?
Glenn Rainey / Martin Burns
Classic 912 M/W
Cumbernauld
EGPG
|