As a Rotax has no flywheel ring gear ! How is your sprag clutch .
> Date: Thu=2C 29 Aug 2013 12:54:04 -0500
> From: topglock@cox.net
> To: europa-list@matronics.com
> Subject: Re: Europa-List: Starter problems
>
>
> Paul=2C
>
> While solenoids "can" be the problem=2C that's not always the case. Worn
> starter brushes are more common. You said turning the prop made it
> start. Was the starter drive=2C perhaps stuck in the flywheel ring?
> Might want to check that the starter is bolted down tight. If nothing
> obvious comes up=2C bring the starter and solenoid to a repair shop=2C
> specializing in starter/alternator repair and let them have a look...
>
> Jeff - Baby Blue
>
> On 8/29/2013 12:42 PM=2C Paul McAllister wrote:
> > Hi All=2C
> >
> > I looking to see if anyone has had starter soleniod or starter motor
> > problems?
> >
> > I was doing a propeller balance last night and I went to re start the
> > engine and I was greeted with a "click". I checked the cable connection
s
> > and they were tight.
> >
> > My initial thought was that the soleniod contacts were dirty or worn=2C
> > but I found that if I rotated the propeller then it would kick over oka
y
> > so now I not sure.
> >
> > Before start pulling things apart I'd like to know if anyone has had
> > problems in this area.
> >
> > Thanks=2C Paul
> >
> > *
> >
> >
> > *
> >
>
===========
===========
===========
===========
>
>
>
|