Hi Alan
It is a trigear and came as a trigear from the factory.
It looks to me like the plan was to put a removable panel on the top.
I have attached a better picture.
On 7/07/2016 11:14 pm, "Alan Burrill" <alanb@dpy01.co.uk> wrote:
>
> Tri-Gear or Monowheel?
>
> Alan
>
> GOBJT
> > On 7 Jul 2016, at 11:35, Graeme Hart <graeme.hart@onecoolkat.com> wrote:
> >
> > Hi All
> >
> > I have a kit that started out around 1999 and has been worked on by a
> number of builder since them.
> >
> > Does anyone recognise the mod that has been done to the cockpit. A lot
> of the top of the centre console has been cut out and reinforced around the
> edges.
> >
> > I'm hoping that this is a recognised mod and someone can point me at
> documentation on what was intended.
> >
> > A picture of part of the cutout section is below (sorry I don't have one
> of the entire cutout)
> >
> > I'd appreciate any leads on how this mod is intended to work. Also,
> with this large hole in the top do you still need the fuel valve access
> panel?
> >
> >
> > Thanks
> > Graeme
> > <20160705_174300.jpg>
>
>
|