Digital Level

[MR ROBERT J MCKECHNIE <ZNTR41A@prodigy.com>]

-- [ From: Bob McKechnie * EMC.Ver #2.10P ] --

The "md" Smartlevel can be set to a resolution of 0.1 or 0.2 degrees,
depending on your needs. It reads over a full 360 degree range and is
easily set to read in degrees, slope(%)[which is equivalent to
cm./meter], pitch (in./ft.), or a similutated "bubble!"  Also, it is
readily recalibrated.  Rails for insertion of the sensor unit can be
had up to 8 ft. long.

Bob (#A007)