Asymmetric anti-servo tabs.

[Graham Clarke <gemin@cix.compulink.co.uk>]

There must be a number of early builders like me who made both their tabs 
---From the template as instructed (before the modified instructions) only 
to find that due to profile differences they sit at different positions. 
Bending the T can hardly be reccommended as it may weaken the weld and is 
difficult if already installed in the fuselage. A simple solution is to 
remake one (or both) of the inserts with the hole off centre, and rotate 
it to adjust for symmetry before final bonding.  

gemin