Reply to Martin Stevens
>>I am now about to set the wing angle of attack, and I wander if anybody out
there has any ideas as to the best way to support the wings during the set up<<
We welded up a couple of "U" shaped brackets with nuts welded to the top of each
leg to take set screws.
A small hole in the base of each "U" allowed them to be bolted sideways onto
the side of the fuselage near the
trailing edge of the wing and the set screws (now pointing up & down) were used
for the fine adjustment of angle of attack.
Ted Gladstone & Justin Kennedy
G-ZTED
|