>
>An alternative to the door warning switches. If a horizontal peg was
>fitted on the door aperture flange such that it engaged in a hole in the
>lower door frame just forward of the door lock mechanism, not only would
>it facilitate the closure of the door by aligning it fore and aft, (the
>gas strut, acting on the rear of the door, seems to produce a slight twist
>in the door as it is closed by the handle at the front and it has to be
>maneuvered forward slightly at the bottom to fit correctly)but it would
>make it impossible for the door to open once the lock was closed even if
>the rear bolt had not engaged. >Ted.
Well done Ted. This is a brilliantly simple idea.
Dave.
|