It certainly is. Get yourself a piece of metal bathroom towel rail and
sharpen the metal at one end. Heat that end with a small blow torch and
simply slide it through the core. You will have a neat hole in under a
minute.
Tony
#272
------------------------
From: Alan Burrill <ABurrill@bottle-neck.demon.co.uk>
Subject: Pitot
Date: Thu, 10 Jul 1997 23:01:44 +1200
> Page 7-11 of constructors manual details cutting a 13mm hole through the
> leading edge root core for the Pitot tube.
>
> As this involves cutting through the rib flange laid up on the core, is
> it not easier to cut this hole before attaching the cores to the spar?
>
> --
> Alan Burrill
>
---------------End of Original Message-----------------
---------------------------------------------------
Tony Krzyzewski tonyk@kaon.co.nz
Managing Director Ph 64 9 358 9124
Kaon Technologies Fx 64 9 358 9127
Auckland
New Zealand
Networkers visit www.kaon.co.nz
Aviators visit www.kaon.co.nz/europa/272index.html
----------------------------------------------------
|