> ...... Now, I am considering not installing the jacks for the headsets in the
> overhead, but instead placing them in the baggage bulkhead an inch or so from
> the outside skin and about even with the bottom of the "D". The jacks wouldn't
> be easily accessible when seated but the headsets could easily be connected
> before entry. This seems like it would keep things tidy, it would likely weigh
a
> little
> less, and it would (not coincidentally) be much less work to implement. Am I
> blinded by sloth, or is this a reasonable approach? ... Comments anyone?
>
> Regards, John A044 Newtown, CT
John,
One thought on this. What if you have to unplug/reinstall a headset while in
flight, due to some communication problem or whatever? Will this installation
allow you enough room to do this without applying for a membership in the FCA
(Flying Contortionists Association)?
Steve Genotte
|