After describing my intentions to the DAR, he asked how I intended
> to inspect the complete length of the cable. This was clearly impossible
> with my initial layout. The new setup is to use an 8 inch length of cable
> from the tailwheel crank to the turnbuckle; by removing the clevis pin the
> cable can slide forward to the pulley to allow inspecting the front
section
> of the cable.
>
Any chance of cloning your DAR and sending him down to NZ. I wouldn't mind
having someone like him around, he sounds like he really has his head screwed
on.
Please, please, please keep us posted on anything else he comes up with.
Have a good weekend.
Tony
---------------------------------------------------
Tony Krzyzewski tonyk@kaon.co.nz
Managing Director Ph 64 9 520 4631
Kaon Technologies Fx 64 9 520 3321
Auckland New Zealand
Networkers visit www.kaon.co.nz
Aviators visit www.kaon.co.nz/europa/272index.html
and www.kaon.co.nz/saanz/
----------------------------------------------------
|