Hmmmph. three guesses who just shaped his second wing tip last night :-(
Tony
> I talked to an aerodynamacist about this, and he said pretty much the same
> thing. His advice was a reasonable radius from the LE into the end, and fly
> it straight back to the trailing edge. -also the top to bottom surface
> radius appears to be important -I plan to start with the LE radius and
> reduce that gradually to about 1/4dia near the TE. The bottom surface will
> just follow the shape produced by more or less straight lining between the
> "tip rib" and the tip plan form.
---------------------------------------------------
Tony Krzyzewski tonyk@kaon.co.nz
Managing Director Ph 64 9 520 4631
Kaon Technologies Fx 64 9 520 3321
Auckland New Zealand
Networkers visit www.kaon.co.nz
Aviators visit www.kaon.co.nz/europa/272index.html
and www.kaon.co.nz/saanz/
----------------------------------------------------
|