For those oldies (ie non XS cockpit module builders), you may like this tip.
When making up the fuel shut off valve you will need a disk to mark out the
position of the valve. I came up with a very tidy solution. Use a CD. Either
steal one that you hate from the kids collection or grab an old CD-ROM. File
out the centre to fit the shaft and voila - a very tidy looking surround for
your cut off valve. Now, if you have a friend who has one of those nifty CD
label printing applications you can make up a neat looking label to go on
the top.
Also to note (which almost caught me out) the outlet points AFT when using a
914!
Tony
--
Tony S Krzyzewski Kaon Technologies Ltd
Managing Director PO Box 9830
Ph +64 9 520 4631 Epsom
Fx +64 9 520 3321 Auckland NZ
Reply to tonyk@kaon.co.nz
Networkers visit www.kaon.co.nz
Aviators visit www.kaon.co.nz/europa/
and www.kaon.co.nz/saanz/
-------
|