-----Original Message-----
From: Klaus Dietrich <101613.3377@compuserve.com>
Date: 21 February 1999 21:37
Subject: Re: TP6's
>I finaly decided to repair my play in the TP 12 by glueing it to the TP 4
>torque tube.
>I used Loctite 603 (for lightly oil contaminated parts, shear strength
.3.700 psi) which I applied on the torque tube on the 10 mm inbord of TP 12.
>I did this only after careful in-situ testing how to soften the glue again
>in case of disassembling without heating the aircraft structure or
>softening the Redux holding the TP 11 bushes.
>In case you are going this route, here is the way to go: take a halogen
>bulb of 150W (size: 75 mm long)
(Snip)
>Thanks to Jim N. for this idea! It works perfectly.
>Have fun...it's just a 10 minutes fix (I'm Ivan's disciple....)
.>Klaus
Thanks for checking it out Klaus, lets hope we don't have to disassemble it
for real !
Jim
|