-----Original Message-----
From: Jens Aabo <gjaabo@image.dk>
Date: 09 April 1999 17:47
Subject: SP S'Fill 400
>SP systems are making a lightweight epoxy filler called S'Fill 400. SP
>recommends to use this filler on top of the ampreg 20 lay-up and to achieve
>the best finish SP Hibuild 302 primer is recommended.
>Is their any of you who have used this combination on the Europa or
planning
>to do so!!!! Is it a good combination or is it too heavy?
Yes, I used exactly that system on G-KWIP. It is OK as SP Hi build is a good
epoxy primer. I would however use the Polifiber water based epoxy now, as
its easier to apply and sands easy too.
Don't use a polyester primer. Blistering due to osmosis is a probable
result.
Graham
|