europa-list
[Top] [All Lists]

TP-12 alignment

Subject: TP-12 alignment
From: Steve Genotte <gopack@sprintmail.com>
Date: Wed, 26 May 1999 22:56:56
Gents,

I'm about to redo my TP-12 / TP-13 set up for my stabilators due to a
change in torque tubes.  (My original tube's nickel plating was
peeling.)  I've discovered the new right and left TP-12's are offset by
approx. 1.5 degrees in the horizontal plane.  Using a spirit level
instead of the hypercritical digital device, I see a difference of  half
a bubble.

So,  is this a big deal requiring some kind of adjustment, or do I aim
for the middle and be done with it?

Thanks in advance,

Steve "Second time around" Genotte
 http://home.sprintmail.com/~gopack/Mainpage.htm



<Prev in Thread] Current Thread [Next in Thread>
  • TP-12 alignment, Steve Genotte <=