>You should have TWO Weights in your kit...<
I do, but as one of them is hidden by the wooden casement, I have only one
which I can add additional weight to. I should have phrased this better!
I am close, and 200g may be topside. Regards, Lloyd
-----Original Message-----
From: Plantragg Developments <ptag.dev@ukonline.co.uk>
<europa@avnet.co.uk>
Date: 31 July 1999 22:19
Subject: RE: Re: Rudder Pedals/Tailplane Mass Balance
>Hi! Geraint.
>No ideas really but I notice you refer to weight in the singular ? You
>should have TWO Weights in your kit. I would have thought you would be
>close if you are using two weights and could therefore put one or two
>large washers on to suplement the shortfall of weight . IMHO of course!
>Regards
>Bob Harrison 337 G-PTAG
>
>-----Original Message-----
From: GERAINT L OWENS [SMTP:lloyd.owens@lineone.net]
>Subject: Re: Rudder Pedals/Tailplane Mass Balance
>
>Two queries for the price of one:
>
>1 I need to add some weight to my tailplane mass balance. Probably
>200gms or less. Can anyone suggest a good way to do this? I was hoping
>to strap some sheet lead around the outer portion of the existing weight;
>but my local metal shop don't stock lead. Any ideas anyone?
>
>2 Walking around Halfords today (UK car accessory store, for our friends
>overseas), I came across some really nice anodised alloy pedals, which
>would
>make great rudder pedals. Just the right size too. I've always felt the
>Europa rudder pedals were a little lacking physically and aesthetically.
>Has anyone experimented already along these lines and added pedals to the
>existing Europa?
>
>Regards, Lloyd Owens.
>
>
|