<< you should have no
problem achieving balance when all is filled and painted , by drilling
holes in them and filling them with blue foam , re- micro and then repaint
after achieving a level aileron when hung by the hinges.
>>
I would like to balance the ailerons after painting but before mounting to
the wing.
Should the pushrod be connected to the aileron and jigged level during
balancing? Seems like the pushrod mass should be part of what's balanced
(since it's effectively part of the aileron) but this isn't clear in my
manual.
Also, my meager understanding of aileron/wing flutter due to unbalanced
ailerons would indicate that erring on the side of over-balance (balance
weight high) is better than under-balance -- is this correct?
John A044
|