I found that this was one of those jobs where the fear of the job was much
worse than doing the work itself.
If you mostly follow the procedure in the manual you'll be fine. I'd
recommend doing one of the stabs first then use that as the reference for
the other rather than trying to do both at once.
Tony
---------------
Tony S Krzyzewski Kaon Technologies Ltd
Managing Director PO Box 9830, Newmarket
Ph 64 9 520 4631 Auckland
Fx 64 9 520 3321 New Zealand
Reply to tonyk@kaon.co.nz
Networkers visit www.kaon.co.nz
Aviators visit www.kaon.co.nz/europa/
---------------
|