Troy,
The Southco parts I used were
Flush head slotted stainless Part Number 82-14-260-20
Base Part Number 82-35-302-15
These part numbers are from DD Aircraft Supply's catalogue who supplied them
to me in the UK quickly and efficiently.
I suggest you use all the same length fasteners and pad out the bases with
shims were necessary.
I suggest you use Nigel Charles' recommendation of fitting these fasteners
through the original Tinnerman washers for an elegant and load spreading
fit.
The ones I have quoted are the longest flush head fasteners Southco make.
Unfortunately they are not long enough in the bottom cowling area and you
should consult with you inspector what is acceptable in that area. I also
notice that the oval head slotted are a bit longer, Part Number 82-11-360-20
and you might like to experiment with a few of those.
Donald Kesterton
----------
From: TroyMaynor@aol.com [SMTP:TroyMaynor@aol.com]
Subject: Cowling Fasteners
Hi Gang,
Does anyone have the specific part numbers for the Southco camloc
fasteners
that some are using on the cowling? These I believe don't require
special
(and expensive) pliers for installing them. They are the quarter
turn
phillips head ones.
Troy
The Europa List is supported by Aviators Network UK -
info@avnet.co.uk
|