> Gents,
>
> We're just about ready to tackle Chpt. 14. I'm unsure about one thing
> at this point, however. The holes in the cockpit module that the S01
> bushes insert into are a 1/2" in diameter smaller than the S01 bush.
> The manual mentions cleaning these holes out but I don't see anything
> about drilling them to a larger size.
>
> Did I miss another newsletter entry or what?
Yes, 1/2" wing spar pins are now standard, requiring a larger S01 to
match it. I just finished this a month or so ago, but I don't remember
if I found it in the old manual, the new manual, or a newsletter.
I am now working on getting the fuel tank in place. The back is not
quite flat, so it doesn't quite fit. I am now working on flattening
it with weight & straps.
Brian
|