Heather & Jim --
Yeah, I found that strange, too. But it gets cut
off. Minimum gaps in the bonding process means
less Redux ($155.00/qt., I hear, if you run out)
and less weight.
Regards,
Fred Fillinger, A063, N3EU
>
> Hi everyone. We (Heather & Jim) are new builders of an XS (builder A185).
> We're working on the cockpit module and started to fit it to the fuselage
> bottom. There is a lip on the module on the outside about 3/8" wide starting
> about 3 inches in front of the head rest and going all the way to the rear,
> in other words right along the part line between the top and bottom fuselage
> halves. Was this supposed to be trimmed off? I don't see any of the trim
> lines but the lip holds the module away from the fuselage side.
>
> We'd appreciate any suggestions (experiences!).
>
> And thanks for this site and everyone's web pages. We read (and hopefully
> learn).
>
> Heather & Jim Butcher
|