In a message dated 7/23/00 3:45:58 PM Eastern Daylight Time, tonyk@kaon.co.nz
writes:
<< Could someone with a flying XS or classic with XS tailwheel conversion
measure the gap from the bottom of the outrigger wheel to the ground (on the
one that's not touching the ground!), when the aircraft is unladen. If
practical I'd also like the figures for one up.
>>
Hi All,
I've been wondering the same thing. You can't hardly go by the diminsions
published because it seems to me that with the small variations in doing the
tailwheel mod and positions of the main gear components, you would need to
custom fit the outriggers with the plane on a level surface. I'm guessing it
should have some rock laterally and not a four point contact. Mine is also a
classic with the mod.
Curiously awaiting.
Troy-# 120
|