Forwarded from the bounce bin by John Cliff. Message was sent by Peter Bondar
<pb@tarantella.com>
**********************************************
Do you mean the two tacho pulse leads from the hall sender on the edge of the
flywheel
to the tach input and ground on the rkymtn box?
Assuming r3 at 22k?
It worries me that there seem to be so many potions to solve this one.
Some say 1k some 22k some say 100k
we tried 1k and it didn't work
peter
Peter Bondar, Vice President Marketing
Tarantella Inc.
email: pb@tarantella.com
web: http://www.tarantella.com
European tel: +44 7901 516259
----- Original Message -----
From: "Bob Jacobsen" <jacobsenra@hotmail.com>
Subject: Rocky Mountain Monitor
>
>
> To hook up a Monitor tach function to a 912S all you have to do is hook the
> two tach leads from the engine to the two tach leads on the Monitor. Don't
> use the magneto wiring shown in the installation manual. No capacitors are
> required.
>
> My unit came with the oil pressure sender for the rotax and westach makes a
> compatible cyl head temp sender that has the required adapter included.
>
> Information on this unit - which is working great for me - can be found at:
>
> www.rkymtn.com
>
> Bob Jacobsen
> A131
>
|