Please excuse the grammatical errors and repeated words in my last
submission as it has been a good Friday evening after a hectic week and
work. The alcohol was flowing freely at happy hour. Though don't be
concerned as no building or flying is occurring this evening.
> [Original Message]
> From: Steve Hagar <hagargs@earthlink.net>
> Date: 8/25/00 9:05:10 PM
> Subject: Re: Realistic Minimum Space to build
>
> HELLOW ALL;
>
> AS FAR AS SPACED IS CONCERNED I am building in a 2 car garage and have my
> nice leveled lay up table and plastic topped fiberglass cutting table in
> there. I have been finishing each of the flight control surfaces and
> moving them out as they are finished and routing them out to storage (in
> the bedroom). The first wing in in the garage and it is a little cozy, but
> still workable. The second wing is to follow in the same manner. I fully
> expect to have to move both tables out when I bring out the fuselage in
for
> work. I would say that a 2 car garage would be the minimun to comfortably
> to do the work. Final assembly will have to be in the drive way though.
> In the Phoenix area this is not too much of a problem however. I could see
> however that it would be possible to do the job in a one car garage if you
> were highly motivated and had a place to get rid of the items that items
> that have been completed.
>
> Steve Hagar
> A143
> Mesa, AZ
>
>
> > [Original Message]
> > From: Rowland & Wilma Carson <rowil@clara.net>
> > Date: 8/25/00 3:15:41 PM
> > Subject: Re: Realistic Minimum Space to build
> >
> >
> > > I only have a standard to small garage, (the Land Rover certainly
does
> not
> > > fit - modern type westbury home :-( )
> > > so i'm currently working out whether it will be too small or do I
need
> to
> > > look for another workshop.
> >
> > Paul - I know of one person (Peter Davis) who has built a (Classic)
> > Europa in a single-car garage. However, I don't think he's online at
> > present.
> >
> > > I also wondered are there any europa builders in the near south/mid
> Wales
> > > area whom have currently commenced building.
> >
> > Off the top of my head, I think there are a few in the area. Europa
> > Club members get a list of members with a geographical summary, but I
> > can't release addresses to non-members. The factory may also be
> > prepared to put you in touch with local builders.
> >
> > regards
> >
> > Rowland
> >
> > | Rowland Carson Europa Club Membership Secretary
> > | Europa 435 G-ROWI PFA #16532 EAA #168386
>
>
>
> --- Steve Hagar
> --- hagargs@earthlink.net
>
>
>
--- Steve Hagar
--- hagargs@earthlink.net
|