Hi, Rick.
You just mix it 50/50, and it's not too critical. I just eyeball two equal
sized blobs and it works great. When you fasten the core to the jig, put
masking tape on the core first then put a dab of the epoxy. Then you won't
have a divot when you pull the core out of the jig.
Have fun!
Chris Beck
A159
Rick wrote:
> Hi,
>
> I am just getting started on my rudder today and immediately I've hit a
> problem. The manual says to fix the jig block to the bench using rapid
> epoxy - I have Araldite (Redux) 420 - but I don't have any mixing
> instructions for it and have had no response from the factory as yet. Can
> anyone tell me what the mix should be?
>
> Thanks
>
> Rick Sivier
> Builder #462
>
|