Here is another of Bob Harrisons picture postings, showing the firewall/
instrument panel for the Jabiru 3300-engined G_PTAG. The posting is from
"Bob.Harrison" <ptag.dev@ukonline.co.uk>
The usual caveat about obtaining design approval from the appropriate place
before modifying your Europa applies.
******************************************
Herewith details of G-PTAG rear instrument panel firewall cutouts/removeable
panels. Note that all future cutouts should have radiused corners. Also please
note that a steel reinforcement flange needs to surround the holes to the rear.
-----
These modifications are expected to be acceptable . The whole of the rear of
the firewall also has a thin sheet of aluminium reduxed to it , which was
originally intended to be a ground shield for radio interferance but apparently
is also acting as reinforcement member also !
Picture at :-
http://www.crixbinfield.freeserve.co.uk/BobH/Fwall/fwall1.htm
Instrument Panel / Firewall Accessway's removed. Note 3No of 4No
Top Cowl Tapered Fix Pins
*************************
Picture at :-
http://www.crixbinfield.freeserve.co.uk/BobH/Fwall/fwall2.htm
Instrument Panel Accessways Replaced. (Holding Bolts not in place)
with Jabiru Filter Box and Carb Heat Control. (Still under Assessment)
**************************
Reposted by John Cliff
|