Hi! All
I bought a commercial kitchen formica work top 8ft x 3ft ,was 12 ft long
but slightly damaged at 25. Mounted on an upturned scrap food chest
freezer.
You can paint release agent on it and so get excellent finishes, dry the
agent quickly by using a heat gun lightly.
Any spillage can be removed by using a sharp chisel (at the appropriate
angle!)
Regards
Bob Harrison G-PTAG Kit 337
-----Original Message-----
On Behalf Of skunk works
Sent: 12 September 2000 09:48
Subject: lay-up table
oh dear, still >prebuild< here due time restrictions.
Nevertheless, the timber lay-up table is now constructed, though I have
difficulty achieving good flatness. One notion is to accept an imperfectly
flat general 'work-surface', but to source a piece of commercial or 'coffee
table' plate glass for direct lay-up work. This might be left naked, or
maybe covered with ply or whatever and should achieve *very* good flatness.
Q. minimum acceptable size ?
cheers
glenn
XS 344 (UK)
Scotland
|