Rudder gap

[Erich D Trombley <erichdtrombley@juno.com>]

Can someone in the group please measure the gap between the trailing edge
of the rudder closeout (port side) and the leading edge of the rudder
when the rudder is fully deflected to S.B.  I keep trimming and trimming
to obtain the required 30 deg. rudder travel to port and I am now at the
point when the rudder is deflected only a few degrees to S.B. the gap
becomes visible and gets rather large at full deflection.  Rather
unsightly.   Thanks

Erich Trombley
A028
Las Vegas, NV