JLW,
A friend had his exhaust glazed (Rotax 582 - 2 stroke) and either the
vibration or the different temp. co's between glass and steel, led to
significant parts of it chipping off.
Aluminisation may be a better choice.
Dave Simpson
-----Original Message-----
From: JLW <jeffw@Telebyte.net>
Date: 21 December 2000 06:32
Subject: Re: Hot manifolds Batman?
>Roger et al.
>
> Unless I hear some compelling reasons for not doing it, I am planning
to
>get my exhaust system ceramic coated. Such as 'Jet Hot' coated.
>
>Roger Mills wrote:
>
>> Not unless you've got a stainless steel exhaust - insulating it has been
>> shown to increase the rate of corrosion of mild steel systems and Europa
>> have made a strong recommendation that all lagging should be removed.
>> Regards
>> Roger Mills
>> 141
>>
>> -----Original Message-----
>> From: owner-europa@aztec.houxou.com
>> Subject: Hot manifolds Batman?
>>
>> Isn't everyone heat taping their exhaust system?
>> You can lay your hand on it at idle, when well taped.
>> Gotta be a good thing.
>> Nic 145
>>
>>
>
|