Keith .... Sorry about this I forgot to answer you question on the peel
ply....
3) Obviously it looks tidier not to leave it in but it will
be buried after filling and painting anyway ! Get the ladies eyebrow
tweezers out and try to get what you can , it can't be weaker than the
polystyrene anyway !!!!
Regards
Bob H G-PTAG
-----Original Message-----
Sent: 08 January 2001 20:39
Cc: europa@avnet.co.uk
Subject: RE: HLP - Ailerons again!
Hi! Rob /Tony /Keith
IMHO ...1).... fill the worst places with dry micro to ensure no air
bubbles(making sure no dry micro on the trailing edge bond area), then
overlay with a wet flox mix prior to top lay up. You will need to fill the
"register" on the other side with filler when you prepare for painting.
2) If you wish your ailerons to flow level with the finished wing DON'T sand
any off the profile.!
Tony ..... Thanks for the Modem cable info . Do I require one with socket
one end and plug the other or sockets both ends or plugs both ends ?
Regards
Bob Harrison G-PTAG
-----Original Message-----
On Behalf Of Rob Waters
Sent: 08 January 2001 19:03
Cc: europa@avnet.co.uk
Subject: Re: HLP - Ailerons again!
Try again Tony. The pics were there when I looked. Unfortunately I don't
know the answers.
Rob
Tony Krzyzewski wrote:
>
> I may as well be first to tell you - there are no images on that page.
>
> Tony
>
> -----Original Message-----
> From: owner-europa@aztec.houxou.com
> Subject: HLP - Ailerons again!
>
> Forwarded from the bounce bin. Message is from
> "Keith Tallent" <ktallent@avnet.co.uk>
>
> *******************************************************
>
> It's me again...boy will I be glad to see the end of these big wet layups!
>
> After turning over the first lay-up, removing the trailing edge support
> block and peel ply, I have a couple of problems.
>
> For problem details, photos and questions, click on this link...
> http://www.thehangar.co.uk/help.htm
>
> I would be grateful for any advice supplied.
>
> regards
>
> Keith Tallent
> Kit No 221
> XS Tri-Gear G-SAMY
>
>
|