amazing....pure fluke....for once I got it right first time.... h
----- Original Message -----
From: Andy Draper <andy@europa-aircraft.com>
Subject: OIL HOSE ROUTING, EUROPA XS
> Further to previous comments the following may be useful to those of you
with the XS engine installations.
>
> The two oil hoses which run underneath the engine, one from the banjo
fitting and the other from the oil pump, (C06), should be routed to pass
over the water hose of the starboard rear cylinder to ensure maximum
distance from the turbo charger/ exhaust system. These hoses should run just
underneath the starter motor and pass through the ring mounting before going
to the oil tank or oil cooler respectively.
>
> Regards
>
> Andy Draper
> Technical Manager
>
|