Paul,
I glassed in a piece of 1" lightweight plastic conduit under the door lip on
each side. It has the added advantage of making the lower door frame
stronger so when you slide in & out of the cockpit it won't crack.
To hold the wires in the tailcone Cliff found some of the lightweight peel
and stick plastic holders for cable ties. You just stick them on and then
run a cable tie through them - works great and is very light and easy to add
wires.
Later
Bob Jacobsen
A131
From: "Paul McAllister" <pma@obtero.net>
>Subject: Routing cables to the instrument panel
>Date: Sat, 13 Jan 2001 21:34:54 -0600
>
>Hi All,
>
>I was wondering what folks were doing for cable routing from the back of
>the
>fuselage forward to the instrument panel. Could some of you share with me
>your ideas.
>
>Thanks, Paul
>Builder 363
>http://pma.obtero.net
>
>
|