Bill McClellan wrote:
> Regarding the brake system, the manual says "Connect the brake hose to
> the elbow fitting in the rear of the slave cylinder. Clip the pipe
> along the top of the swinging arm as far as the LG04 pin." (p.29-4) My
> kit has no elbow for the slave cylinder and no brake hose or pipe. Are
> these items supposed to be part of the kit or selp purchase. There is
> no adequate item description on my inventory list to answer this for
> me. I will call Lakeland in the morning but does anyone know.
>
> Thanks to Graham, Bob, Paul, Dave, Troy and Tony who answered my rudder
> cable question.
> Bill McClellan
> A164
>
Bill,
We received a peice of black plastic tubing
for the brake line that had the elbow on it.
We installed the tubing, but found it
leaked when we applied the brakes. We
finally gave up on it and bought a
brake line from an auto speed shop.
Terry Seaver
A135
|