All:
I've been poring over the 914 Installation Manual to find out what needs
and what should be monitored in the cockpit.
The list I obtained is below. Could other 914 owners share what
parameters their setup monitors?
Red and Orange idiot lights
CHT ( looks like 1 sensor on the standard installation. Anyone do
all 4?)
EGT ( looks like 1 sensor/side. Aren't 4 needed?)
Oil Temp
Oil Press
Manifold Pressure
RPM
Airbox Temperature
The following parameters have sensors that feed the TCU but don't
display:
Ambient Pressure
Airbox Pressure
The following parameter is not sensed:
Coolant Temperature (why?)
The usual other engine systems parameters:
Fuel level, pressure, flow
Volts, Amps
OAT
Thanks,
Shaun Simpkins
A207
|