RE: Oil Line

[Nigel Charles <72016.3721@compuserve.com>]

Message text written by "Roger Mills"
>Do you need special fittings at the end of the hose you're using - or is
directly interchangeable with the rubber hose?<

Jubilee clips work finewith silicone hose but if you are using the
stainless type with slots in it is probably worth using a short piece of
heatshrink at each end to stop the clip biting into the silicone outer
layer of the tube.

I believe that special fittings are needed with Teflon hose should anyone
consider that as an alternative.

Nigel Charles