>I personally don't agree there is any significant distortion there.
>But should there be a little, wouldn't it make better sense to install
>the windshield after the engine, so that the windshield isn't under
>constant stress?
>
>Regards,
>Fred F., A063
The screen will stress relieve itself over time, especially if it
occasionally stands in hot sun for a few hours. Proper stress relief
procedure is to heat to 90 degrees C, hold for a couple of hours then
slowly cool down for about 10 hours or so. (Softening starts to occur at
120 and above ) There is no sharp melting point.
Graham
|