Rob Housman wrote:
>
> Perhaps it is a difference in technique. I always leave some of the film
> free of the epoxy so I have a bit of the film to grip, thus facilitating its
> removal. If none of the film is "clear of the epoxy then it would be much
> more difficult to get the film separated because there will be one
> atmosphere of pressure holding it against the epoxy surface.
I never had any trouble with any type of plastic film either (food
wrap, polyethylene drop cloth, whatever). I do notice that if not
fully cured (an overnight cure isn't) it will stick a bit. For small
parts, I put 'em in the colder part of an oven at 170F for a while.
Regards,
Fred F.
|