Re: Trim tab servo installation

[Graham Singleton <grasingleton@avnet.co.uk>]

>My inspector gave me a good tip for a fixed trim tab. Rather than making
>one from aluminium (which is difficult to adjust once it is fixed to the
>aileron) he suggested using a wedge of balsa wood (similar to the flettner
>strips) just on the underside of the aileron. This can be taped on
>initially and its length adjusted until it is just right.

That's the way to do it. Start with a 30cm length first then reduce to 
suit. My 2 cent guess based on your description of the roll

Graham