>I have filled and sanded my Stabilizers prior to priming/painting. I'm
>doing this prior to fitting the top - to enhance the balancing
>procedure. My stuff is the British SP 106, with Expencell that came with
>the kit - and for priming I'm going to use Hibuild from SP.
I used this primer and found it very good. It is epoxy so that is good.
Easy to flat back and available in white too. I always mix Cabosil with the
expancell. It mixes better and spreads nicely.Roughly 4 to 1 by volume.
>My next problem is UV protection. Do I have to apply silver before paint,
>or can I just spray on a layer of clear Polyurethane UV protection as
>final top coat?
I did not use silver. I was told the urethane top coat had UV protection
and so did the Hi Biuld.
Graham,
|